From Madeira, a thread box that can be used as a thread stand, and comes complete with embroidery designs, 80 spools of thread, embroidery needles, thread cutters and more.
- 80 Smart Spools of Madeira Rayon Thread 220 yds each
- 2 spools of 70-wt. Bobbinfil - 1650 yds each
- 5-pack of embroidery needles
- Built-in thread cutters that are safely recessed on both ends of the carrying handle.
- Spools are easy to remove and replace in their thread pockets.
- Each pocket labeled with it's corresponding spool color number and name.
- The box can be used as a thread rack.
- Built-in threading system runs thread directly from the box to the machine without having to unpack the thread.
- CD with 42 Embroidery designs.
- Shoulder strap for convenient portability.
- Madeira machine embroidery thread color guide included.
- Box dimensions - 8-3/4" × 14-1/4" × 3-1/4"
- Madeira thread conversion chart included.
| BOX DOUBLES AS A THREAD RACK! |
|---|
1. Pull all colors needed for embroidery design. Place spools in thread chambers in color order, working left to right on each side. | 
2. Pull each thread up from its chamber and through its corresponding thread guide. For best results thread must feed from the outside of spool. |
3. Close the doors and stand up the box on its base to the right of the machine. | 
4. Grasping all threads at once, clip ends to eaven using the built-in thread cutters. |
5. Thread machine with first color and begin stitching, repeat for each color. Thread should feed from right side of box, up and through guides, and directly into your machine. | 
6. Rotate box to access second set of chambers on reverse side. Guides can be threaded from both sides if you are using both sides of box. |
© 1999-2008 Texas Sew Wares, Inc.
