All Kenquilt products are special order. Allow 6-8 weeks for freightline delivery. This product is not returnable.
- Its machine housing is made of lightweight aerospace aluminum alloy
that has been powder coated for a lustrous durable finish.
- The Dutchess Machines are made at the KenQuilt facility in Kansas.
- The color of the machine is Bonded Copper Vein.
- The Dutchess has 18" from the needle to the back of the throat and 9"
from the bottom to the top. The actual quilting space on the Dutchess
is 16". It looks like the Prince, only shorter.
- Uses a Titanium Needle size 135 x 7 size 18.
- The Hopping Foot is centered to the needle so that quilting templates
can be used accurately and easily.
- Uses a Rotary Hook with an extra large bobbin capacity - Size M.
- Built-in Bobbin Winder is included to allow you to wind extra bobbins
while quilting.
- Both Horizontal and Vertical thread stands are located on the machines
for using small and large specialty spools of thread.
- Only 2 tensions are located on the machines - one pretension and one
rotary tension.
- 12" LED Light is located over the needle area and will not burn hands
quilting from the front of the machine. It is wired independently so that
it can be used even with the machine turned off.
- Leveling Glides are located on the bottom of the legs to adjust the
height and to level the table.
- Focusing and Dimming Laser Light Stylus is located on both the
Standard and Stitch Regulated Machines for tracing patterns
accurately. It can be used at the front and back of the machine.
- Users can quilt from the front or back of the machine using foam
cushion grip handles. The front and rear handles are ergonomically
adjustable and designed at a 45 degree angle for ease of use.
- Sealed ball bearings and oil impregnated bronze bushings allow for
only two lubrication points.
- Top mounted motor with 2.12 Amp 148 W and 3400 RPM. Top
mounting the motor makes it easy to upgrade Standard Models to the
IntelliStitch Turbo CL Stitch Regulator.
- Standard Models include a Variable Speed Control knob to adjust the
machine speed to your movement.
- 8" Polymer Grip at the cog end of rollers makes for nonslip adjustment
rollers.
- Our new cog ratcheting system allows for finer adjusting of the quilt.
- EdgeRider wheels with sealed ball bearings on the cross track and
machine allows for effortless movement in any direction.
- The table is made out of extruded aluminum.
- The width of the table is 45".
- Accessories with the machine - 18 patterns, 10 needles, 6 bobbins, 4
clamps, 1 spool of thread, screwdrivers, oil, and a manual.
- Warranty on new machines - 36 months parts and labor and 25 years
on the housing.
|
Additional Options/Accessories
|
