null

Hooptech Gen 2 Cap Frame Fits Brother/Baby Lock 10 Needle Machines

$384.99
No reviews yet Write a Review
SKU:
hooptech-599734
UPC:
675900912335
Condition:
New
Availability:
Usually leaves our warehouse on the next business day.

The GEN 2 from Hoop Tech is the next generation HTP style cap frame. Originally called The Dream Frame, the GEN 2 was redesigned to allow sewing closer to the bill than ever before. And it is the easiest cap frame that we have ever made to frame all styles of caps, even visors!

The new “GEN 2” features include:

  • A spring steel bill retainer that sets and holds the bill angle.
  • Backing clips to hold your stabilizer in place during framing.
  • Internal retaining fingers for proper bill alignment.
  • Lighter frame design (20% less weight) than the original.
  • Redesigned bill retainer with closer access to the bill.
  • Open design Top Clamp.
  • Large sewing field.

Fits Models: PR & Babylock 10-Needle machines

The EMS / Hoop Tech Cap Frames are built tough to stand up to day to day production use. The heavy gage stainless steel construction will give you years of service. The EMS / Hoop Tech Cap frame design allows for variation in cap size, shape and material thickness. When used with the Hoop Tech patented “T”-Bar Framing gage, framing a finished cap becomes as easy as 1-2-3.

Please Note: When using hoops on your Brother machine that are non-Brother hoops you may have to do a trial layout. Make sure the needle or foot will not hit the frame when it is sewing.

Important Notes:

  • The Hooptech T-Bar Adjustable Framing Gauge (Hooptech-599775) is required to use this Cap Frame
  • You must have an existing Cap Driver from the machine manufacture to connect to your machines.
  • There is a metal cap that covers the machine's hoop sensor which tells the machine a Cap Frame is attached. For each sew out press the layout icon for trial run to ensure the needle will not hit the hoop while sewing.

Brother & Baby Lock Owners: The new “GEN 2” will turn your (6) & (10) needle machine into a REAL cap sewing machine. The new bill holding strap holds down the bill so you can get closer to the needles than ever before, for a much larger sewing field.

gen1.jpg

For PR & Baby Lock owners, the “GEN 2” comes with a specially designed override bracket that attaches to your cap frame drive bar with one of the 2 thumb screws, and allows you to sew a larger sewing field and increases the stitching speed. (Just click here to see how easy it is to set up your machine for the dream frame)

gen2.jpg

The new "GEN 2" from Hoop Tech is the next generation EMS style cap frame. It was specially designed to maximize the sewing field on the front two panels of a finished cap, while still maintaining registration.

This cap frame is lighter, has backing holding clips, is easier to frame, and with the new bill retaining strap you can sew closer to the bill than ever before.

gen3.jpg

The GEN 2 works with all types of caps:

Structured - Unstructured - Low Profile - Full Crown - Strap Back - Flex Fit - Fitted - Flat Bill - Pre-curved - New Era - Pacific - Nylon - Military Style. And don't forget VISORS! (With and without sweatbands)

gen4.jpg Now, finally an easy way to hold and sew visors! Full field sewing access with no bill restriction. Don’t settle for putting your design just where you can get it to sew, put your design where it looks good!
 gen5-1-.jpg  The new “GEN 2” features include:

- A spring steel bill retainer that sets and holds the bill angle.
- Backing clips to hold your stabilizer in place during framing.
- Internal retaining fingers for proper bill alignment.
- Lighter frame design (20% less weight) than the original.
- Redesigned bill retainer with closer access to the bill.
- Open design Top Clamp.
- Large sewing field.