The adjustable guide on this foot offers perfectly centered hands free placement of cords, ribbon, braiding, or tape up to 5mm in width.
1. Loosen the screw on the presser foot and insert a braid through the guide
before attaching the presser foot on the machine.
2. Slide the plate of the guide back and forth to fit the width of the braid.
3. Tighten the screw and pull the braid behind the presser foot.
4. Attach the presser foot onto the machine.
5. Set the zig zag width slightly wider than the width of the braid.
6. Stitch braid in place.
For Use With: LS-2125i, XL-2600, XL-2610, XL-3510, XL-3500T, ES-2000, ULT-2003D, XR-40, PC-8500D, NX-200, SE-270D, XL-6562, XL-5130, PC-6500, XL-5340, PS-1250, PS-1000, NX-600, CS-6000T, NX-400, XL-5500, XL-5600, XL-5700, CS-100T, CS-8072, Innov-ís 2500D, Innov-ís 1000, Innov-ís 1500D, Innov-ís 4000D, PC-2800, PC-3000, PC-6000, PC-7000, PC-7500, PC-8200, PE-300S, PS-2200, PS-2300, PS-2500, ULT-2001, ULT-2002D, XL-3022, XL-3030, XL-3100, XL-3500, XL-5232, XR-52C, PE-400D, CS-6000i, EX-660, HE-120, LS-1217, LS-1717, PC-8500, PS-1800, PS-1950, PS-2100, VX-1120, VX-1140, VX-1250, VX-1400, XL-2121, XL-2230, XL-3025, XL-3027, XL-3200, XR-37, XR-46C, NX-450, NX-250, PS-3700, NX-650Q, Innov-ís 1200, QC-1000, PC-210, PC-420, LS-2125, CE-4000, NX-400Q, XL-2600i, BC-1000, CS-6000, CS-6000B, Pacesetter™ PS21, Duetta™ 4500D, Innov-ís 40- Limited Edition, Innov-ís 80- Limited Edition, PC210PRW - NEW Ltd Edition, PC420PRW - NEW Ltd Edition, Innov-ís 900D, SE-350, CE-5000PRW, Quattro™6000D – New!, VX-1435, LB6770 PRW - Limited Edition
